Polybutylene terephthalate (PBT) is a thermoplastic polyester resin produced by having 1.4-butanediol (BDO) and purified terephthalic acid (PTA) going through polycondensation and kneading process. Because it possesses a number of excellent features, it is widely used in the electronics, home appliance, IT, communication, and automotive industries. It is the material that is gaining the most attention among wide range of engineering plastics.
Polybutylene Terephthalate (PBT) Neat Resin: Overview and Key Properties
| Category | Details |
|---|
| Chemical Structure | Semi-aromatic polyester, linear polymer of butanediol and terephthalic acid |
| Type | Thermoplastic polyester (engineering plastic) |
| CAS Number | 24968-12-5 |
Physical & Mechanical Properties
| Property | Value/Range |
|---|
| Density | 1.30-1.38 g/cm³ |
| Melting Point | 220-230°C (428-446°F) |
| Tensile Strength | 50-60 MPa |
| Flexural Modulus | 2.300-2.800 MPa |
| Elongation at Break | 50-300% |
| HDT @ 1.82MPa | 55-65°C |
Thermal & Electrical Properties
| Property | Performance |
|---|
| Continuous Use Temp. | -40°C to 120°C |
| UL Rating | HB (flammability) |
| Dielectric Strength | 16-20 kV/mm |
| Volume Resistivity | 10¹⁵-10¹⁶ Ω·cm |
Processing Parameters
| Parameter | Conditions |
|---|
| Injection Molding Temp. | 240-270°C |
| Mold Temp. | 60-80°C |
| Drying Conditions | 120°C for 3-4 hours |
Chemical Resistance
| Chemical | Resistance |
|---|
| Oils/Greases | Excellent |
| Alcohols | Good |
| Weak Acids | Fair |
| Strong Bases | Poor |
| Hot Water | Limited |
Applications by Industry
| Industry | Typical Uses |
|---|
| Electrical/Electronic | Connectors, switches, circuit breakers |
| Automotive | Sensor housings, fuel system components |
| Consumer Goods | Appliance parts, power tool housings |
| Industrial | Pump components, gear wheels |
Advantages vs. Limitations
| Advantages | Limitations |
|---|
| Excellent electrical properties | Poor UV resistance |
| Good dimensional stability | Susceptible to hydrolysis |
| Fast crystallization rate | Limited impact strength at low temps |
Comparison with Similar Polymers
| Polymer | PBT vs. Alternatives |
|---|
| PET | Faster crystallization, lower HDT |
| PA6/PA66 | Lower moisture absorption, less tough |
| POM | Better chemical resistance, less creep |
Market & Grades
| Aspect | Details |
|---|
| Leading Producers | BASF, DuPont, Celanese, SABIC |
| Standard Grades | Unreinforced, 15-45% glass fiber reinforced |
| Price Range | 2.5−2.5−4.5/kg (2024) |
Summary
PBT neat resin offers an optimal balance of mechanical properties, electrical characteristics, and processing ease for engineering applications. While its hydrolysis sensitivity requires consideration for outdoor use, its fast cycle times and reliability make it indispensable in electrical and automotive components. Recent developments focus on hydrolysis-resistant and sustainable variants.
Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.
