Standard Group - Rubber Additives Manufacturer
MIAK,Nitrobenzene,Rubber additives, etc.Green and sustainable development
TEL:+86-21-6420 0566

hexylamine

OEM  OEM Services Provided
Feature Good stability
Classification Paint Additives
Advantage  Professional, Fast Delivery, Customizable
Samples Apply for free,Contact Export Director now ↓

CAS No. 111-26-2

Content 99%

Packing 150kg/drum

Names and Identifiers

Namehexylamine
SynonymsAMINE C6
Hexylamin
hexylamine
n-C6H13NH2
Hexyl amine
aminohexane
1-HEXYLAMINE
N-HEXYLAMINE
1-AMINOHEXANE
hexan-1-amine
hexan-1-aminium
H**n-hexylamine
1-Amine-n-hexane
NORMAL HEXYL AMINE
hexylamine,[liquid]
RARECHEM AL BW 0240
Hexan-1-amine, гексиламин, гексан-1-амин, 1-аминогексан, n-hexylamine, 1-Aminohexane
гексиламин, гексан-1-амин, 1-аминогексан, hexan-1-amine, n-hexylamine, 1-Aminohexane
CAS111-26-2
EINECS203-851-8
InChIInChI=1/C6H15N/c1-2-3-4-5-6-7/h2-7H2,1H3/p+1
InChIKeyBMVXCPBXGZKUPN-UHFFFAOYSA-N

111-26-2 – Physico-chemical Properties

Molecular FormulaC6H15N
Molar Mass101.19
Density0.766g/mLat 25°C(lit.)
Melting Point−23°C(lit.)
Boling Point131-132°C(lit.)
Flash Point27 °C
JECFA Number1588
Water Solubility14 g/L (20 ºC)
Solubility14g/l
Vapor Presure10.6 hPa (20 °C)
AppearanceLiquid
ColorClear colorless to slightly yellow
BRN1731298
pKa10.56(at 25℃)
PH11.6 (10g/l, H2O, 20℃)
Storage ConditionStore below +30°C.
StabilityStable. Incompatible with acids, acid anhydrides, acid chlorides, carbon dioxide, strong oxidizing agents.
SensitiveAir Sensitive
Explosive Limit2.1-9.3%(V)
Refractive Indexn20/D 1.418(lit.)
Physical and Chemical PropertiesMelting Point: -22.9 ℃ Boiling Point: 131.4 density: 0.77 solubility: slightly soluble in water, miscible in ethanol, ether appearance and properties: colorless liquid
UseMainly used in organic synthesis

111-26-2 – Risk and Safety

Risk CodesR10 – Flammable
R21/22 – Harmful in contact with skin and if swallowed.
R35 – Causes severe burns
R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed.
R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety DescriptionS26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S16 – Keep away from sources of ignition.
S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
UN IDsUN 2734 8/PG 1
WGK Germany1
RTECSMQ4540000
FLUKA BRAND F CODES34
TSCAYes
HS Code29159020
Hazard NoteIrritant/Flammable/Corrosive/Air Sensitive
Hazard Class8
Packing GroupII
ToxicityLD50 orally in Rabbit: 240 mg/kg

111-26-2 – Reference Information

FEMA4243 | HEXYLAMINE
LogP2.06-2.31 at 25℃
usesmainly used in organic synthesis
this product is mainly used as dyes, pigments, surfactants and intermediates in pharmaceutical synthesis.
Used as an intermediate in organic synthesis and biochemical reagent.
Production methodIt is obtained by treating methyl n-hexyl ketone oxime with phosphorus pentachloride. Methyl n-hexyl ketone oxime is treated with phosphorus pentachloride in ether, then water is added to stir well and then stratified. The N-acetyl-n-ethylamine generated by rearrangement is dissolved in ether, and the ether layer is separated. Distillation recovers ether, the remaining oily liquid is hydrolyzed with a dilute solution of potassium hydroxide, and then distilled. Collect 130-133 ℃ fractions to obtain hexylamine.
categoryflammable liquid
toxicity classificationpoisoning
acute toxicityoral-rat LD50: 670 mg/kg
stimulation dataskin-rabbit 10 mg/24 hours severe; Eye-rabbit 2 mg/24 hours severe
flammability hazard characteristicsflammable in case of open flame, high temperature and oxidant; toxic nitrogen oxide smoke from combustion
storage and transportation characteristicswarehouse ventilation and low temperature drying; Store separately from oxidants and acids
fire extinguishing agentdry powder, dry sand, carbon dioxide, foam, 1211 fire extinguishing agent
spontaneous combustion temperature270°C

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.

Ready to Start?

For help with solutions customized to your business needs, contact Export Director now.

With 30+ years of experience and We firmly believe that product quality is the basis of cooperation.

Chat Now
Online Customer Service
contact

TEl

+86-21-6420 0566

WhatsApp
Service