Acrylic polyol resin MT-7152-80

Characterization

Acrylic polyol resin designed for high solid low VOC ACE top coating

Form supplied

Form supplied is approximately 80% in butyl acetate

Applications

Suitable for 2K PU coatings providing outdoor durability, high solid and low VOC.

Specification

Property: Hydroxylvalue, on solid

Value: 83

Unit of measurement :mg KOH/g

Method :TM-2432

Solubility / thinnability

can be thinned with aromatics, esters and ketones solvent.

Storage

The resin should be stored indoors in original, unopened and undamaged container in a dry place at storage temperature between 5- 30 °C. Exposure to direct sunlight should be avoided.

Storage time

Covestro represents that, for a period of 6 months (180 days) following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section “specifications or characteristic data” above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section “storage” above and is otherwise handled appropriately. The lapse of the 6 months (180 days) period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the 6 months (180 days) period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 6 months (180 days) period.

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.