【 WhatsApp】
+86-21-6420 0566
| OEM | OEM Services Provided |
| Feature | Good stability |
| Classification | Paint Additives |
| Advantage | Professional, Fast Delivery, Customizable | Samples | Apply for free，Contact Export Director now ↓ |
| Products name ： | Diacetone Alcohol |
| CAS NO. ： | 123-42-2 |
| Molecular Formula： | C6H12O2 |
| Structural formula： |  |
| Use： | Pharmaceutical intermediates, paint solvents |
| Rules： | ≥99% |
| Name | 4-Hydroxy-4-methyl-2-pentanone |
| Synonyms | Tyranton Diacetone Diketone Alcohol Diacetone alcohol Diaectone alcohol TIMTEC-BB SBB009084 (CH3)2C(OH)CH2C(O)CH3 Acetonyldimethylcarbinol 2-methyl-2-pentanol-4-one 2-Methylpentan-2-ol-4-one 2-Methyl-3-pentanol-4-one 4-hydroxy-4-methylpentan-2-one 4-Hydroxy-4-methyl-2-pentanone 4-Methyl-4-Hydroxy-2-pentanone 2-Hydroxy-2-methyl-4-pentanone 2-Pentanone, 4-hydroxy-4-methyl- 4-Hydroxy-2-keto-4-methylpentane Diacetone Alcohol 〔4-Hydroxy-4-methyl-2-pentanone〕 |
| CAS | 123-42-2 |
| EINECS | 204-626-7 |
| InChI | InChI:1S/C6H12O2/c1-5(7)4-6(2,3)8/h8H,4H2,1-3H3 |
| Molecular Formula | C6H12O2 |
| Molar Mass | 116.16 |
| Density | 0.938 g/mL at 20 °C |
| Melting Point | -42.8 °C |
| Boling Point | 166°C(lit.) |
| Flash Point | 132°F |
| Water Solubility | MISCIBLE |
| Solubility | Soluble in alcohol, ether (Weast, 1986), and many other solvents, particular ketones such asacetone and 2-butanone. |
| Vapor Presure | <1 mm Hg ( 20 °C) |
| Vapor Density | 4 (vs air) |
| Appearance | Liquid |
| Color | Clear colorless |
| Odor | Mild, pleasant. |
| Exposure Limit | TLV-TWA 240 mg/m3 (50 ppm) (ACGIH);IDLH 2100 ppm (NIOSH). |
| Maximum wavelength(λmax) | [‘249nm(lit.)’] |
| Merck | 14,2964 |
| BRN | 1740440 |
| pKa | 14.57±0.29(Predicted) |
| Storage Condition | Store below +30°C. |
| Stability | Stable. Flammable. Incompatible with strong oxidizing agents, amines, ammonia, strong acids, strong bases, alkalies, aluminium. |
| Explosive Limit | 1.8-6.9%(V) |
| Refractive Index | n20/D 1.423(lit.) |
| Physical and Chemical Properties | Colorless flammable liquid with pleasant odor. melting point -44 ℃ boiling point 164 ℃ relative density 0.9387 refractive index 1.4213 flash point 12.7 ℃ , halogenated hydrocarbons, ethers and water miscible. |
| Use | Used as high boiling point solvent, paint thinner, Wood colorant, rust remover and dye raw materials |
| Hazard Symbols | Xi – Irritant |
| Risk Codes | R36 – Irritating to the eyes |
| Safety Description | S24/25 – Avoid contact with skin and eyes. |
| UN IDs | UN 1148 3/PG 3 |
| WGK Germany | 1 |
| RTECS | SA9100000 |
| FLUKA BRAND F CODES | 9 |
| TSCA | Yes |
| HS Code | 2914 40 10 |
| Hazard Class | 3 |
| Packing Group | III |
| Toxicity | LD50 orally in rats: 4.0 g/kg (Smyth) |
| Raw Materials | Phthalic anhydride Acetone |
| Downstream Products | Mesityl oxide, mixture of alpha- and beta-isomers |
white or yellowish transparent liquid with aromatic flavor. Relative density 0. 9387 (20 ℃). Melting Point -44 °c. Boiling point 167.9 °c. Refractive index 1.4232. Flash point 13 °c. Soluble in water, ethanol, ether and chloroform, unstable, and alkali or in atmospheric distillation when the decomposition. Long-term storage at room temperature is easy to polymerize.
acetone is obtained by condensation under the action of a basic catalyst.
It is used as an intermediate in the manufacture of isopropylidene acetone, methyl isobutyl ketone, methyl isobutyl methanol and hexanediol, chlorone, isophorone from acetone; It is also widely used as a paint brightener, an amino lacquer, a diluent for Nitro paint, and acetyl cellulose, epoxy resin and other solvents.
This product stimulates eyes, skin and respiratory mucosa. Enters the body through the respiratory and digestive tracts, affects the nervous system, damages the liver and stomach. Inhalation of high concentrations of vapor will form pulmonary edema, even Coma. Long-term exposure can lead to dermatitis.
External use of iron drum or glass bottle is lined with a wooden box for packing. Store in a cool and ventilated silo, away from heat source and fire, avoid direct sunlight; Store and transport with oxidant and acid Isolation.
| Concentration | 0.1 mCi/ml |
| Specific Activity | 25-50 mCi/mmol |
| Solvent | Ethanol |
| LogP | -0.09 at 20℃ |
| Use | diacetone alcohol is one of the important derivatives of acetone, used in the preparation of metal detergents, wood preservatives, hydraulic oil solvents; diacetone alcohol can be used for the preparation of methyl isobutyl ketone, methyl isobutyl methanol, hexenediol, phenyl oxygen, isophorone and other intermediates; Diacetone alcohol can be used as paint, celluloid, nitrocellulose, fat, oil, wax, dyes and resin solvents; Diacetone alcohol can be used as photographic film preservatives, antifreeze, extractants, pharmaceutical intermediates, special comonomers, organic synthesis of raw materials. diacetone alcohol is an intermediate in the process of preparing isopropylidene acetone, methyl isobutyl ketone, methyl isobutyl methanol, hexylene glycol, chlorone and isophorone from acetone. Diacetone alcohol can be used to prepare metal detergents, wood preservatives, photographic film and drug preservatives, antifreeze, hydraulic oil solvents, extractants and fiber finishing agents. Diacetone alcohol is widely used as a solvent for electrostatic paint, celluloid, nitrocellulose, fats, oils, waxes and resins. used as raw materials of high boiling point solvent, paint thinner, Wood colorant, rust remover and dye, etc. used as raw materials of dye and resin solution cellulose acetate and esterified cellulose, A solvent for celluloid and the like. Biochemical studies. Electrophoretic analysis. Wood preservatives. |
| preparation | 1) preparation of catalyst metal aluminum plate (thickness 0.1, purity 99.0%) in order to remove the natural oxide layer on the surface of metal aluminum, the natural oxide layer was immersed in 20% NaOH solution for 3min, and then immersed in 30% HNO3 solution for 1min. After the treatment, the aluminum plate was used as the anode, the lead plate was used as the cathode, the mass fraction of oxalic acid was 4% as the electrolyte, the current density was 1.5A/dm2, the temperature was 20, after anodizing for Al2O3-Al H, the first carrier was made into the form of a Rasch ring filler with a diameter of about 3mm, and water-sealed in a water bath at 80 ° C. For H, the carrier was prepared by calcination at 350 °c for 1H. The catalyst carrier is immersed in a certain concentration of Mg(NO3)2 solution, stirred at a certain temperature for a certain time, drying in an oven at 125 C for more than 8H. The MgO/Al2O3-Al solid base catalyst was prepared by calcining at a certain temperature for a certain time. 2) acetone condensation reaction The condensation reaction was carried out in a 250ml three-necked flask, the reaction temperature was controlled with a contact thermometer, and heated and stirred with a SZCL type digital display temperature control magnetic stirrer. The catalytic reaction was carried out under boiling condition, adding GC-14C ml of raw material acetone, 2g of catalyst, without adding water-carrying agent, and the reaction time was 1H. The product was analyzed by gas chromatograph, The activity of the catalyst was expressed in terms of acetone conversion. The results showed that the optimum preparation conditions were as follows: impregnation concentration 2.0%, impregnation temperature 55 ℃, impregnation time 2.0h, calcination temperature 550 ℃ and calcination Time 4.0h. Under these conditions, the conversion of acetone was 21.08% and the selectivity of diacetone alcohol was 100%. |
| production method | is obtained by condensation of acetone under alkaline conditions. 1250kg of acetone was consumed per ton of product. |
| category | flammable liquid |
| toxicity grade | poisoning |
| Acute toxicity | oral-rat LD50: 4000 mg/kg; Oral-mouse LD50: 3950 mg/kg |
| stimulation data | Skin-rabbit 500 mg mild; Eye-rabbit 20 mg severe |
| explosive hazard characteristics | explosive when mixed with air |
| flammability hazard characteristics | flammable in open flame, high temperature, strong oxidant; combustion emissions |
| storage and transportation characteristics | The package is complete, light and light unloading; The warehouse is ventilated, away from open flame, high temperature, separate from oxidant |
| fire extinguishing agent | foam, dry powder, carbon dioxide, sand |
| Occupational Standard | TLV-TWA 50 PPM (240 mg/m3); Tel 75 PPM (360 mg/m3) |
| spontaneous combustion temperature | 640°C |
| immediate life-and health-threatening concentrations | 1,800 ppm [10% LEL] |
Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.
For help with solutions customized to your business needs, contact Export Director now.
With 30+ years of experience and We firmly believe that product quality is the basis of cooperation.
Chat Now
TEl
+86-21-6420 0566
