Standard Group - Rubber Additives Manufacturer
MIAK,Nitrobenzene,Rubber additives, etc.Green and sustainable development
TEL:+86-21-6420 0566

Polyester Polyol MT-670 BA

OEM  OEM Services Provided
Feature Good stability
Classification Paint Additives
Advantage  Professional, Fast Delivery, Customizable
Samples Apply for free,Contact Export Director now ↓

Introduction

Slightly branched hydroxyl-bearing polyester.As a co-reactant primarily with MT- N 75 and ultra N 3390 in the formulation of weather-stable flexible coatings.

Product Types

Polyester resin

Material

Coatings, paints & inks

Flexible, Elastic, Weather resistant, Solventborne

Applications

Combined with MT- N 75 or ultra N 3390. MT-670 BA yields films with very good weather stability and excellent low temperature flexibility. Such coatings are mainly used to coat plastics and are force-dried, e.g. at 80 °C. MT-670 BA can also be added to other two-component polyurethane systems to improve their flexibility.

Form supplied

approx. 80 % in butyl acetate

Solubility / thinnability

MT-670 BA is soluble in ethyl acetate, butyl acetate, 1-methoxypropylacetate-2. methyl ethyl ketone, methyl isobutyl ketone, toluene and mixtures of all these solvents. However, the solutions formed must be tested for their storage stability. Solutions in xylene with a solids content of less than 40 % may separate. Only PU grade solvents should be used (< 0.05 % water, free from other reactive impurities).

Compatibility

Generally speaking, MT-670 BA is miscible with many polyester MT-grades and various vinyl copolymers. However, the combinations must be tested for their compatibility. MT-670 BA has only limited compatibility with acrylate MT-grades and with cellulose acetobutyrate.

Storage

– Storage in original sealed MT container.

– Recommended storage temperature: max. 30 °C.

– Protect from moisture, heat and foreign material.

General information: Under certain conditions (temperatures below 15 °C, long storage) the product may become cloudy. It can be completely rehomogenized by heating to around 40 °C or adding solvent, and can be further processed without any loss of quality.

Specification

PropertyTest ConditionValueUnitStandard
Hazen color value≤ 150DIN EN 1557
Acid value1.8 ± 1mg KOH/gDIN EN ISO 2114
Viscosity at 23°C3.000 ± 400mPa*sDIN EN ISO 3219/A.3
Non-volatile content1 g resin/1 h 125 °C, convection oven80 ± 1%DIN EN ISO 3251
Hydroxyl content3.5 ± 0.3%DIN EN ISO 4629-2
Water content≤ 0.1%DIN 51 777/1

Typical Values

PropertyTest ConditionValueUnitStandard
Equivalent weightapprox. 485
Density at 20°Capprox. 1.11g/mlDIN EN ISO 2811-2
Flash pointapprox. 32°CDIN EN ISO 2719

 

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.

Ready to Start?

For help with solutions customized to your business needs, contact Export Director now.

With 30+ years of experience and We firmly believe that product quality is the basis of cooperation.

Chat Now
Online Customer Service
contact

TEl

+86-21-6420 0566

WhatsApp
Service