Rheological AIDS 7410

product presentation:

7410 solvent type and insoluble system for liquid rheological additives, also suitable for PvC plastic sol and natural curing resin system. It can form high tensile change effect, and therefore improve the settlement and flow resistance. It can also be added later.

chemical composition

Modified urea solution

Typical naterialized data

surface:Yellow liquid

active ingredient%:152%

density ²g/cm²:About:1.13

ldissolvant：IN-methylpiroroinone

Features and advantages:

After mixing into the coating system, the auxiliary agent will build a three-dimensional structure. The formed tensile mobility can prevent settlement and improve the flow resistance without affecting the leveling.

Recommended dosage:

0.2-1% of the total formula (supp ly form) prevents settlement.

0.5-2% of the total formula (supp ly form) is used for flow protection.

affected by system polarity and solid content.

Add method and processing guidance:

Appropriate shear, stir while adding. as soon as possible to disperse evenly. No special temperature control is required. Can be added in the grinding stage or in the paint blending stage

Add later, and adjust the viscosity. If the product is well compatible with the system,depending on the polarity.

The rheological effects can be evaluated after 2 to 4 h after addition.

Recommended for moderate polarity systems.

Special attention:

The use of drying agents may cause discoloration due to the formation of metal complexes. and the rheological properties need to be tested. There is no yellowing when the standard amount is added. Pay attention to the yellowing when the addition amount is to high. For the reaction system, the catalytic system, and When using nitrocellulose systems, we recomend testing for storage stability.

Special attention:

Sharing with a metal catalyst may cause

discoloration or delay in curing. Packaging

specification: 2 kg barrel

Storage and shelf Iife Storage temperature: store at room temperature to avoid exposure.

Shelf Iife: the shelf Iife of the well-packaged products is 12 months under the appropriate storage conditions.

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.