【 WhatsApp】
+86-21-6420 0566
| OEM | OEM Services Provided |
| Feature | Good stability |
| Classification | Paint Additives |
| Advantage | Professional, Fast Delivery, Customizable | Samples | Apply for free，Contact Export Director now ↓ |
CAS No. 108-44-1
Content 99.50%
Packing 200kg/drum 1000kg/IBC
| Name | m-Toluidine |
| Synonyms | m-Toluidine 3-Toluidine m-Toluamine m-Tolylamine M-Toluidine 0 Meta Toluidine 3-Aminotoluene 3-Methylaniline 3-METHYLALANINE 3-METHYLANILINE AKOS BBS-00003559 Between toluidine 3-Methylbenzenamine 3-methylanilinium chloride M-TOLUIDINE FOR SYNTHESIS 1 L M-TOLUIDINE FOR SYNTHESIS 100 ML |
| CAS | 108-44-1 |
| EINECS | 203-583-1 |
| InChI | InChI=1/C7H9N.ClH/c1-6-3-2-4-7(8)5-6;/h2-5H,8H2,1H3;1H |
| InChIKey | JJYPMNFTHPTTDI-UHFFFAOYSA-N |
| Molecular Formula | C7H9N |
| Molar Mass | 107.15 |
| Density | 0.999g/mLat 25°C(lit.) |
| Melting Point | -30 °C |
| Boling Point | 203-204°C(lit.) |
| Flash Point | 186°F |
| Water Solubility | 0.2 g/100 mL (20 ºC) |
| Solubility | 0.2 g/100 mL (20°C) |
| Vapor Presure | 0.3 hPa (20 °C) |
| Appearance | Crystalline Solid or Liquid |
| Color | White |
| Exposure Limit | TLV-TWA skin 2-ppm (～9 mg/m3) (ACGIH). |
| Merck | 14,9536 |
| BRN | 635944 |
| pKa | 4.73(at 25℃) |
| PH | 7 (H2O, 20℃) |
| Storage Condition | Store below +30°C. |
| Refractive Index | n20/D 1.567(lit.) |
| Physical and Chemical Properties | Appearance: colorless transparent oily liquid purity: ≥ 98.5% p-toluidine: ≤ 0.7% o-toluidine: ≤ 0.1% moisture: ≤ 0.3% |
| Use | As an intermediate for cationic dyes and color film developers |
| Risk Codes | R45 – May cause cancer R23/24/25 – Toxic by inhalation, in contact with skin and if swallowed. R33 – Danger of cumulative effects R50 – Very Toxic to aquatic organisms |
| Safety Description | S53 – Avoid exposure – obtain special instructions before use. S28 – After contact with skin, wash immediately with plenty of soap-suds. S36/37 – Wear suitable protective clothing and gloves. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S28A – |
| UN IDs | UN 1708 6.1/PG 2 |
| WGK Germany | 2 |
| RTECS | XU2800000 |
| FLUKA BRAND F CODES | 8-23 |
| TSCA | Yes |
| HS Code | 29171990 |
| Hazard Note | Toxic |
| Hazard Class | 6.1 |
| Packing Group | II |
| LogP | 1.4 at 25℃ |
| Introduction | M-Toluidine is a colorless liquid that turns yellow or reddish brown in air or under the action of light. The relative density of 0.989, the melting point of -43.6 deg C, boiling point of 203~204 deg C. Slightly soluble in water, soluble in ethanol and ether. It can be volatilized with water vapor and prepared from M-nitrotoluene by reduction reaction. M-Toluidine is mainly used as a pharmaceutical synthesis intermediate. |
| Application | methylaniline is one of the simplest aromatic amines and is also a widely used intermediate in organic synthesis, pharmaceutical and Other Organic synthesis intermediates. At present, the domestic production mainly uses nitrotoluene as raw material, ethanol or methanol as solvent, and Ni as catalyst to prepare methyl aniline by hydrogenation reaction. |
| preparation | add weighed M-nitrotoluene and nano-catalyst to the autoclave, replace the reactor with nitrogen for 3 times (replacement pressure 0.3MPa), start the stirring; Open the hydrogen cylinder pressure reducing valve and pressure regulating valve, control the hydrogen pressure, and fill the high-pressure reactor with an appropriate amount of hydrogen, and heat up to the temperature in the kettle to the set temperature; Continue to stir and supply hydrogen to the kettle, and remove the reaction heat from the reactor to the cooling water to maintain the stability of the reaction temperature; Until the reactor pressure starts to rise, stop feeding hydrogen and cooling water, continue stirring and heating to maintain the reaction temperature for 0.5h; Stop stirring, separate the catalyst and reaction solution, and remove 30% (mass) of the reaction solution under appropriate conditions, weighing, 3-methylaniline was obtained and the main content was analyzed. It is feasible to prepare 3-methylaniline by using methyl aniline as solvent and catalytic hydrogenation of nitrotoluene with nano catalyst. The catalyst and solvent can be recycled, and the process is safe, environment-friendly, low cost and low energy consumption. The optimal process indexes were as follows: the ratio of nitrotoluene to methylaniline was 4 ∶ 10 (mass ratio), the amount of nano catalyst was 10% of the amount of nitrotoluene, and the reaction temperature was 100~120 ℃, h2 pressure 1.20~1.40 MPa, stirring rate 1500r/min. Under these conditions, the conversion of nitrotoluene was over 88.5%, and the selectivity to methylaniline was 100%. |
| synthesis method | The hydrogenation reaction of M-nitrotoluene to produce m-toluidine was catalyzed by nickel as a catalyst in an industrial methanol solvent. Through single factor and orthogonal experiments, taking 80g m-nitrotoluene as the calculation standard, under the fixed condition of industrial methanol solvent of 200mL, the optimum reaction conditions were obtained: The catalyst was 2.0g, the reaction time was 6h, the reaction temperature was 90 ℃, and the reaction pressure was 1.6MPa. Under these conditions, the content of M-toluidine was 99.79%, the content of light component was 0.11%, and the content of recombinant component was 0.10%. |
| purpose | This product is an intermediate of active yellow X-R and cationic Violet 2RL. use as analytical reagent, also for the synthesis of organic and dyes use as intermediate for cationic dyes, color film developers assay osmium, palladium, platinum, ruthenium and nitrite. |
| production method | is prepared by reducing M-nitrotoluene with iron powder. |
| category | toxic substances |
| toxicity grade | high toxicity |
| Acute toxicity | oral-rat LD50: 450 mg/kg; Oral-mouse LD50: 740 mg/kg |
| stimulation data | Skin-rabbits 500 mg/24 h mild; eye-rabbit 20 mg/24 h moderate |
| flammability hazard characteristics | flammable in case of open flame; Toxic nitrogen oxide fumes from combustion; reaction with oxidant |
| storage and transportation characteristics | The warehouse is ventilated and dried at low temperature, separate storage of food additives |
| extinguishing agent | carbon dioxide, foam, sand, dry powder. |
| Occupational Standard | TWA 9 mg/m3 |
| spontaneous combustion temperature | >500°C |
Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.
For help with solutions customized to your business needs, contact Export Director now.
With 30+ years of experience and We firmly believe that product quality is the basis of cooperation.
Chat Now
TEl
+86-21-6420 0566
