Silicone fluid（MT6000 ）

PRODUCT DESCRIPTION

MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid.

APPLICATIONS

• Thermostatic fluids (-50°C – 200°C)

• Dielectric fluids (impregnation of paper for condensers)

• Anti-blotting products for photocopying machines.

• Thinning and plastifying agents for RTV’s and silicone sealants.

• Lubricating and heat protecting agents for textile threads (synthetic sewing threads)

• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).

• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).

• Water repellent treatment:

– of powders ( for paints and plastics)

– of fibres : glass fibres

• Release agents (mould release for plastics and metal castings)

• Surfactants for styrene-butadiene foam.

Typical Properties

• Very good resistance to high and low temperatures

• Good combustion resistance

• Good dielectric properties

• Low surface tension

• High compressibility

• Absence of ageing upon exposure to atmospheric agents

• Good oxidation resistance

• Little change in viscosity with temperature

• Good resistance to high and prolonged shear stress

STORAGE AND HANDLING

When stored in the original unopened packaging at a temperature of between –20°C and 50°C, MT6000 may be stored for up to 2 years from its date of manufacture (expiry date). Comply with storage instructions and expiry date marked on the packaging.and recommendations made by material safety datasheet be observed at all times.

PRODUCT SAFETY

The Safety Data Sheet (SDS) should always be read and completely understood prior to the handling of any chemical product. It is important that adequate safety procedures are followed by the user. Information on the toxicity, environmental and industrial hygiene aspects of products may be found in the SDS.

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.