polyester poly （MT670 BAC）

Use:

Binder for coating materials

Relevant identified uses of the substance or mixture and uses advised against

Type of product: Mixture

Mixtures

polyester polyol

ca. 80 % in n-butyl acetate

Information on basic physical and chemical properties

Emergency overview

yellowish, liquid, solvent-like. Flammable liquid and vapour. May cause drowsiness or dizziness

Classification of the substance or mixture

GHS Classification:

Flammable liquids, Category 3 (H226)

Specific target organ toxicity (single exposure), Category 3 (H336) (Narcotic effects)

Mixtures

polyester polyol

ca. 80 % in n-butyl acetate

Hazardous components

n-Butyl acetate

Concentration [wt.-%]: ca. 20

GHS Classification: Flam. Liq. 3 H226 STOT SE 3 H336 (Central nervous system)

Trimethylolpropane

Concentration [wt.-%]: ca. 0.5

GHS Classification: Repr. 2 H361f

Description of first aid measures

General advice: Take off all contaminated clothing immediately.

If inhaled: Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing,

medical advice is required.

In case of skin contact: In case of skin contact wash affected areas thoroughly with soap and plenty of

water. Consult a doctor in the event of a skin reaction.

In case of eye contact: Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long

period of time (at least 10 minutes). Contact an ophthalmologist.

If swallowed: DO NOT induce the patient to vomit, medical advice is required

Precautions for safe handling

Provide sufficient air exchange and/or exhaust in work rooms.

Provided good ventilation and/or local exhaust systems are used, the Workplace Exposure Limit(s) stated in

section 8 should not be exceeded.

Explosion protection required.

The personal protective measures described in section 8 must be observed. The precautions required in the

handling of solvents must be taken. Avoid contact with skin and eyes and the inhalation of vapor.

Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep

working clothes separately. Change contaminated or soaked clothing.

Respiratory protection

Respiratory protection required in insufficiently ventilated working areas and during spraying.

Hand protection

Suitable materials for safety gloves; EN 374:

Laminate glove – PE/EVOH/PE; breakthrough time >=480 min.

In the event of contamination, change protective gloves immediately. Recommendation: contaminated gloves

should be disposed of.

Eye protection

Wear eye/face protection.

Skin and body protection

Wear suitable protective clothing.

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.